1. Take an old t-shirt or another piece of cloth and cut out a big square.

2. Fold one of the corners down until it touches the opposite side of the square. This should make a triangle. If there is a space at the bottom that is not part of the triangle, cut it off. Leave the triangle folded.

3. Take the wooden rod and place it along one of the edges of the triangle. Position it so that it is in between the two pieces of fabric but on their edges. Hot glue in place.

4. Twist the two ends of the pipe cleaners together to make one big pipe cleaner.

5. Wrap one of the ends of the pipe cleaner around the wooden rod where the fabric stops. Hot glue the pipe cleaner along the outside of the fabric until you reach the wooden rod again on the other side.

6. Lay the bottle down. Stand the wooden rod up towards the bottom of the bottle and hot glue in place. *Hold the wooden rod in place until the hot glue has dried.*

To Name Your Boat, You Can:

1. Cut out a rectangle from the foam.

2. Write the name of your boat on the foam and glue it to the side of the bottle.

Or, You Can:

1. Cut out a rectangle from the foam.

2. Draw block letters spelling the name of your boat

3. Cut out the letters.

4. Glue the individual letters to the side of the bottle.